New Arrivals
Specifications:
| Gross weight | 8g |
| Brands | Gtoolspro |
The third-generation new integrated process battery repair cable makes the operation easier
1. Support I0S:15-17.3 old system, plug in the cable and plug in the data cable to turn on the computer, wait
for the power to be displayed in the upper right corner, then turn it off, wait for 5 seconds and then turn it
on again, enter the system to check the battery 100% and the repair is complete.
2. Support 17.4 and above systems, and can be flashed through i4, SHALOU, 3U and other software. Default 100%,
automatic reading of original machine cycle and other powerful functions to avoid flashing and turning red.
Note: Models supporting running diagnosis are 12-15PM (11-11P/PM are not supported)
3.12 and above models, 18.1 and above systems support flashing-free repair battery 100% Use the original
disassembled battery to install it on the mobile phone, turn off the phone after the battery diagnosis is
completed, take it out, and then buckle the repair cable with the original battery for the second diagnosis.
After the completion, the mobile phone is 100%.
Note: Do not connect i4 and 3UTOOLS in the middle, wait until the original battery diagnosis is completed
and install it (avoid turning red)
4. Pay attention to the buckle of the motherboard end, you need to buckle and press lightly to avoid damage.
Gtoolspro
