New Arrivals
Specifications:
| Quality | Ori |
| Color | Gray |
| Gross weight | 2500g |
| Compatible Models | MacBook Pro 14" 2021 A2442 |
| Version | Replace Chip Version |
Test before installation
1.A screen is a breakable item, we strongly suggest you to test it before installing it. When testing, do not remove any protective film or tags. please pay attention the problem of static discharge.
2.Testing process - please conect the flex cable of the new replacement screen to the monthboard cable of the test device , power it on, start the testing. if it turns on as usual, you can install the screen. if the device doesnt turn on, please contact us as soon as possible and do not install the screen.
3.please make sure that the screen flex cable is not over bent - an angle of more than 90 degree will cause a black screen or stripes.
Packaging process diagram
Note :
1. This screen IC is encrypted. If you replace the screen assembly directly, there will be a shadow on
1. This screen IC is encrypted. If you replace the screen assembly directly, there will be a shadow on
the top, and the rest will display normally. There is not solution for this problem at this moment. If you
don't accept this shadow, plz don't order this screen assembly.
2. If you replace the LCD only, a black screen will appear when it starts, and it will display normally after
sleep mode. Or a shadow will appear on the top.
3. To solve the above problems, you need to remove the IC on the LCD PCB board from the original screen
and solder it to this new LCD. Then you can solve the shadow and black screen problem.
Gray
