Touch FPC Connector Port Onboard for iPad Pro 12.9 2015(1st)/Mini 2019/Mini 5 Ori 42Pin

Specifications:

Packaging process diagram

Product contents:

The item includes following parts:

1. Front glass lens

2. Touch screen flex cable

Specification

1. Quality: Ori

2. Compatible with: iPad Pro 12.9 (2015)

3. Screen Size: 12.9 inches, 519.2 cm² (~77.0% screen-to-body ratio)

4. Weight: about 2.00g

Product Features:

1. The touch screen is fragile, please handle it carefully.

2. All the screw holes and cuts are precise; this touch screen will fit your phone perfectly.

3. The touch screen has been checked carefully and works well before shipping.

Application:

Ⅰ. The item often solves the following problems:

1. The front glass is cracked, shattered, or broken obviously.

1. 2. The phone is not responsive to your touch.

Ⅱ. This touch screen is responsible for all touch function of iPad Pro 12.9 (2015). Compared with replacing the

whole screen replacement (includes LCD screen and touch screen) which also solves problems above,

replacing touch screen is cheaper but also more complex since separating LCD and glass is not a easy

task. If you don’t have professional skills and tools, we suggest you buy the screen replacement.

Ⅲ. How to know which Screen part you need:

1. Only LCD Screen: In this case when the touch panel is not damaged but the image under the glass

    is not clear, you only need an LCD screen.

2. Only Touch Screen: In this case when the image under the touch panel is fine but the touch

    panel or glass is broken, you only need a Touch screen.

3. Screen Replacement: When both the top touch panel and the LCD image are broken, 

    you need a complete screen replacement.

1. 
   
2. Package Content:

1 x Touch Screen FPC Connector for iPad Pro 12.9

Tips:

1. Before ordering: Please check your phone model and read related information carefully.

2. Before installation: In order not to hurt the LCD, It would be better to test the item first, as assembling

    and separating LCD and touch screen is a little bit tough.

3. Testing process: First, attach the flex cable of the new touch screen to the motherboard of testing

    phone, second, power on, then, just starting testing. During the test, please remember not to remove

    any protective film or tags and mind static electricity.

4. Testing result: If the test result is OK, then you can install it, if not, please contact us as soon as

    possible and do not install it forcefully because we will not be responsible for damage caused during

    and after installation.

5. Installation: special tools and professional operation are highly recommended.

6. We offer 1 years warranty for this item.